33 11 kv gis prefabricated substation

A 33 11 kv gis prefabricated substation adopts the gas insulation switchgear as the electrical distribution panel on primary and secondary voltage side. Conso Electrical Science and Technology Co., Ltd not simply assemble gas insulation switchgear into a prefabricated substation, evermore, the company manufacture gas insulation switchgear for a 33 11 kv gis prefabricated substation. The company has produced prefabricated substation since 2006. It could produce about 15 piece of prefabricated substation in 30 days. We are enthusiastic about the opportunity to meet with international businesses and discuss potential cooperation prospects.

Send Inquiry

Product Description

Video

33 11 kv gis prefabricated substation Maintaining Precautions：

1. The substation door is equipped with a wind-resistant mechanism to keep it fully open. When closing the substation door, make sure to lift the base of the wind-resistant mechanism upward and avoid forcefully pulling or dragging the door to prevent deformation of the mechanism or the door, which could affect the proper functioning of the substation.

2. After manually operating the high-voltage load switch locally, return the operating handle to the handle bracket on the inside of the outer door to prevent it from getting lost.

3. When the spare circuit of the high-voltage ring main unit is not connected to the cable temporarily, lock the spare circuit before energizing the ring main unit or use the provided insulating cap to seal the cable socket to prevent potential accidents.

4. The dust cover supplied with the ring main unit at the time of delivery cannot replace the insulating cap.

5. It is not allowed to use any short-circuit plugs to insert into the test holes during operation, as this can lead to damage to the voltage sensors.

6. The low-voltage isolating switch can only be operated when it is in the unlocked position. Do not force it or pull it forcefully.