The distribution technique of 10 kV single phase pole mounted transformers primarily exhibits four fundamental characteristics:
Power is supplied from the distribution substation (or switchyard) to residential buildings (or commercial users) via 10 kV power lines.
single phase transformers are pole mounted, and low-voltage lines (220V) are used for distribution into the premises, with a focus on minimizing the length of the service lines, which should not exceed 20 meters.
single phase pole mounted transformer capacities are selected rationally, matching the maximum power demand of residential buildings (or premises), creating a situation of small-capacity, closely spaced distribution points.
Electric meters are centrally located in suitable positions within the building corridors, with one meter per household.
Rated Capacity: | 15 kVA; |
Mode: | D11-M-15 or depends; |
Primary Voltage: | 6350V, 7620V, 7967V, 13800V, 33000V or depends; |
Secondary voltage: | 120V;220V,240V,250V or depends; |
Cooling method: | ONAN; |
No Loading Loss: | 50 W±10%; |
Loading Loss: | 195 W±10%; |
Temperature Rise: | 60K/65K; or depends; |
Phase Number: | Single Phase; |
Working temperature: | -40 ℃ to 40 ℃. |
![]()
Front Mounted
|
![]()
Side Mounted
|
![]()
Single Phase Transformer
|
![]()
Single Pole Mounted
|
Winding Workshop |
Coil Drying Area |
Oil Filling Area |
Finished Product Area |
Transformer Oven |
Casting Equipment |
Foil winding machine |
Wooden Box |
Steel Structure |